Screw air compressor in the process of operation will occur or small noise, where these noise comes from, and how to deal with it? Our professionals in Anshan Xingsheng Air Compressor Co., Ltd. are analyzed as follows:
Source of noise:
Air compressor plays an important role in production, but air compressor is a kind of equipment with strong noise. The primary origin of air compressor noise is the intake port, exhaust port, mechanical outlet electromagnetic port of these four parts. The air compressor has high noise level, low frequency SE, long transmission distance and large pollution range. Especially, the frequency of some noise is close to the natural frequency of human viscera, causing resonance, making people suffer from dizziness, nausea, tachyarrhythmia, hypertension and other illnesses. It not only causes the quality of people's work and life to decline, but also simple accidents and interpersonal conflicts. Therefore, the control of air compressor noise is not only an important issue of labor maintenance and environmental maintenance, but also an important issue for production enterprises to continue to carry out well-being, so the noise and noise management of landing air compressor is particularly important.
1. How to land the noise of air compressor intake: generally, mufflers can be installed. Because the noise of air compressor inlet is of low frequency, the resistant muffler should be selected.
2. How to land the exhaust noise of air compressor: Because the exhaust noise of air compressor with high exhaust pressure and large flow rate is high, special muffler should be set in the exhaust system to stop operation. The exhaust muffler requests a large amount of muffling noise and has a wide muffling frequency band. It has the effect of reducing the pressure drop of exhaust exhaust to reduce the exhaust exhaust noise.
3. How to land the noise of the air compressor body: the noise of the air compressor body and the noise of the motor are controlled. The commonly used operation techniques of sound insulation and absorption are selected. The method is to add a sound insulation cover or a sound insulation room to the compressor to prevent the transmission of noise.
4. How to land the vibration noise of the air compressor body: Bi is required to control the vibration when controlling the noise of the air compressor. The vibration of the air compressor is transmitted outward mainly through the foundation and pipeline system, and the vibration control is mainly controlled by vibration isolation.